You can define the operating mode of sound, light and vibration signaling via the menu. Separate sound and vibration permissions are available for buttons and alarms.
Use [Signals] item of Settings to define the operating mode of signalization:
1
while in the Settings, set focus on the [Signals] item by short pressing the "up" and "down" swing buttons;
enter the submenu by short pressing the round button.
There are no rows in this table
If you need to change the global sound permission, take the following steps (while in the [Signals]):
1
select [Sound] item by short pressing the swing buttons;
select [On] or [Off] variant,according to the desired action, by short pressing the round button.
There are no rows in this table
If you need to change the global vibration permission, take the following steps (while in the [Signals]):
1
select [Vibro] item by short pressing the swing buttons;
select [On] or [Off] variant,according to the desired action, by short pressing the round button.
There are no rows in this table
If you need to change the light signaling permission for gamma quanta registration, take the following steps (while in the [Signals]):
1
select [Light] item by short pressing the swing buttons;
select [On] or [Off] variant,according to the desired action, by short pressing the round button.
There are no rows in this table
If you need to change the click signaling permission for gamma quanta registration, take the following steps (while in the [Signals]):
1
select [Clicks] item by short pressing the swing buttons;
select [On] or [Off] variant,according to the desired action, by short pressing the round button.
There are no rows in this table
If you need to change the separate permissions for buttons pressing, take the following steps (while in the [Signals]):
1
set focus on the [Buttons] item by short pressing the "up" and "down" swing buttons;
enter the submenu by short pressing the round button.
There are no rows in this table
To change the sound permission (while in the [Buttons]):
1
select [Sound] item by short pressing the swing buttons;
select [On] or [Off] variant,according to the desired action, by short pressing the round button.
There are no rows in this table
To change the vibration permission (while in the [Buttons]):
1
select [Vibro] item by short pressing the swing buttons;
select [On] or [Off] variant,according to the desired action, by short pressing the round button.
There are no rows in this table
To return to the higher level or quit the menu, set focus on the [<Back] or [<< Menu quit] item respectively and confirm your choice by short pressing the round button.
If you need to change the separate permissions for alarms signaling, take the following steps (while in the [Signals]):
1
set focus on the [Alarms] item by short pressing the "up" and "down" swing buttons;
enter the submenu by short pressing the round button.
There are no rows in this table
To change the sound and vibration permissions of the dose rate alarms (while in the [Alarms]):
1
set focus on the [Dose rate] item by short pressing the "up" and "down" swing buttons;
enter the submenu by short pressing the round button.
There are no rows in this table
To change the sound and vibration permissions of the accumulated dose alarms (while in the [Alarms]):
1
set focus on the [Dose] item by short pressing the "up" and "down" swing buttons;
enter the submenu by short pressing the round button.
There are no rows in this table
Next steps are identical for [Dose rate] and [Dose] settings:
1
select the [Alarm1], [Alarm2] or [Out of scale] item by short pressing the "up" and "down" swing buttons;
enter the submenu by short pressing the round button.
There are no rows in this table
Next steps are identical for [Alarm1], [Alarm2] and [Out of scale] settings:
to change the sound permission (while in the [Alarm1], [Alarm2] or [Out of scale]):
1
select [Sound] item by short pressing the swing buttons;
select [On] or [Off] variant,according to the desired action, by short pressing the round button.
There are no rows in this table
to change the vibration permission (while in the [Alarm1], [Alarm2] or [Out of scale]):
1
select [Vibro] item by short pressing the swing buttons;
select [On] or [Off] variant,according to the desired action, by short pressing the round button.
There are no rows in this table
To return to the higher level or quit the menu, set focus on the [<Back] or [<< Menu quit] item respectively and confirm your choice by short pressing the round button.
Want to print your doc? This is not the way.
Try clicking the ⋯ next to your doc name or using a keyboard shortcut (
