radiacode_cyberspace
Device manual

Menu

Menu

After turning-on, RadiaCode-101 starts to work in Monitor mode.
1
While in one of the Display modes (Monitor in this example), enter the menu by long pressing the round button.
After entering the menu, the menu item icons is located on the left side, and the text name of the selected item is located at the top of the display.

There are no rows in this table

Six menu items are available at the top level (see the table below):
1

Settings
Settings submenu.
2

Spectrum
Display mode: energy spectrum of absorbed photon radiation (X-ray and gamma).
3

Monitor
Display mode: dose rate or count rate (see also Display units).
4

Dose
Display mode: accumulated dose (X-ray and gamma).
5

Search
Display mode: graphical representation of the count rate (search graph).
6

Power off
Turning off the device.
There are no rows in this table

There are three simultaneously visible items after entering the menu. Navigating through the menu and selection of the desired item is made by short pressing the swing buttons “up” and “down”. Hidden items become visible as you move through the menu. When the button is held down, the items are quickly scrolled up or down. The selected item will be marked with a negative icon, to confirm your choice short press on the round button.

The menu is organized cyclically at all levels. For example, pressing the swing button "down" on the top level of menu moves the focus from item to item in the following order: --> --> --> --> --> --> --> etc...

General structure of the menu is shown below.
[Settings] – transition to device settings submenu .
[Display units] – choice between presentation of dose rate and count rate for Monitor mode (see also Display units).
[Measurement units] – transition to submenu.
– [Dose] – selection of the units: [Sv (Sievert)] / [R (Roentgen)]
– [Count rate] – selection of the units: [CPS (counts per second)] / [CPM (counts per minute)]
– [< Back] – return to a higher level, presented in all submenus;
– [<< Menu quit] – return to display mode, presented in all submenus;
* further, the last two points [< Back] and [<< Menu quit] are designated as [< <<]
[Dose rate] – transition to submenu.
– [Alarm 1] – setting alarm threshold 1 for the dose rate;
– [Alarm 2] – setting alarm threshold 2 for the dose rate;
– [< <<];
[Dose] – transition to submenu.
– [Alarm 1] – setting alarm threshold 1 for the accumulated dose;
– [Alarm 2] – setting alarm threshold 2 for the accumulated dose;
– [< <<];
[Screen] – transition to submenu.
– [Backlight] – transition to submenu;
– – [Turning on] - backlight turninig-on mode: [Auto] / [Never] / [By button];
– – [Duration] - backlight turninig-off timeout: [5 s], [10 s], [15 s], [30 s]
– – [Brightness] - backlight brightness level: from [0] to [9]
– – [< <<];
– [Rotate] – image orientation mode: [Auto] / [Right] / [Left];
– [< <<];
[Signals] – transition to submenu.
– [Sound] – selection [On] / [Off], for all sounds
– [Vibro] – selection [On] / [Off], for all vibration signals
– [Light] – selection [On] / [Off], light flash for a radiation quantum registration, separately
– [Clicks] – selection [On] / [Off], sound for a radiation quantum registration, separately
– [Buttons] – transition to submenu
– – [Sound] – selection [On] / [Off], sound for pressing the buttons, separately
– – [Vibro] – selection [On] / [Off], vibration for pressing the buttons, separately
– – [< <<];
– [Alarms] – transition to submenu.
– – [Dose rate] – transition to submenu.
– – – [Alarm 1] – transition to submenu.
– – – – [Sound] – selection [On] / [Off]
– – – – [Vibro] – selection [On] / [Off]
– – – – [< <<];
– – – [Alarm 2] – transition to submenu.
– – – – [Sound] – selection [On] / [Off]
– – – – [Vibro] – selection [On] / [Off]
– – – – [< <<];
– – – [Out of scale] – transition to submenu.
– – – – [Sound] – selection [On] / [Off]
– – – – [Vibro] – selection [On] / [Off]
– – – – [< <<];
– – [Dose] – transition to submenu.
– – – [Alarm 1] – transition to submenu.
– – – – [Sound] – selection [On] / [Off]
– – – – [Vibro] – selection [On] / [Off]
– – – – [< <<];
– – – [Alarm 2] – transition to submenu.
– – – – [Sound] – selection [On] / [Off]
– – – – [Vibro] – selection [On] / [Off]
– – – – [< <<];
– – – [Out of scale] – transition to submenu.
– – – – [Sound] – selection [On] / [Off]
– – – – [Vibro] – selection [On] / [Off]
– – – – [< <<];
– – – [< <<];
– – [< <<];
– [< <<];
[Bluetooth] – selection [On] / [Off]
[Language] – selection [Russian (Русский)] / [English]
[Time] – transition to the time setting dialog
[Device info] – transition to the device information submenu
[Factory settings] – transition to the reset dialog
selection [No] / [Yes]
[< <<];
[Spectrum] – display of photon energy spectrum;
[Monitor] – display of dose rate or count rate;
[Dose] – display of accumulated dose;
[Search] – display of count rate search graph;
[Power off] – turning off the device.
Want to print your doc?
This is not the way.
Try clicking the ⋯ next to your doc name or using a keyboard shortcut (
CtrlP
) instead.