Use [Dose] item of Settings to set up the alarm thresholds 1 and 2 for the accumulated dose of radiation:
1
while in the Settings, set focus on the [Dose] item by short pressing the "up" and "down" swing buttons;
enter the submenu by short pressing the round button.
There are no rows in this table
If you need to change the alarm threshold 1, take the following steps (while in the [Dose]):
1
set focus on [Alarm 1] item by short pressing the swing buttons;
enter the submenu by short pressing the round button, then setup dialog will appear;
select the desired digit of the threshold value by short pressing the round button;
change the value of the selected digit by short pressing the swing buttons;
repeat the previous two steps to set all digits of the value.
There are no rows in this table
1
To return to the higher level with or without changes select [Enter] or [Esc] item respectively;
confirm your choice by long pressing the round button.
There are no rows in this table
If you need to change the alarm threshold 2, take the following steps (while in the [Dose rate] submenu):
1
set focus on [Alarm 2] item by short pressing the swing buttons;
enter the submenu by short pressing the round button, then setup dialog will appear;
select the desired digit of the threshold value by short pressing the round button;
change the value of the selected digit by short pressing the swing buttons;
repeat the previous two steps to set all digits of the value.
There are no rows in this table
1
To return to the higher level with or without changes select [Enter] or [Esc] item respectively;
confirm your choice by long pressing the round button.
There are no rows in this table
1
To return to the Settings or quit the menu set focus on the [<Back] or [<< Menu quit] item respectively and confirm your choice by short pressing the round button.
There are no rows in this table
Want to print your doc? This is not the way.
Try clicking the ⋯ next to your doc name or using a keyboard shortcut (
