Dose mode is designed to represent the accumulated dose for X-ray and gamma radiation.
1
In the Dose display mode, the screen represents:
status bar - at the top;
vertical graphic scale of the accumulated dose - at the left;
numerical value of the accumulated dose with its units - at the center and on the right.
There are no rows in this table
There is a standard information of Display modes on the right side of status bar.
The following information is shown on the left side of status bar:
1
Time of the dose accumulation: days, hours, minutes.
There are no rows in this table
Using buttons
The following quick control options are available in this mode by using the buttons:
long press on the swing button "down" resets the accumulated dose value;
long press on the swing button "up" global turns on and off the sound signaling.
Setting alarm thresholds
Using the menu, you can set two alarm thresholds for the accumulated dose level. If the level of the alarm threshold is exceeded, a pulsating sign will be displayed in the status bar:
1
- for Alarm 1;
2
- for Alarm 2.
There are no rows in this table
If any of the alarm thresholds for the accumulated dose level is exceeded, the corresponding alarm will be triggered. To stop the accumulated dose alarm you need to confirm that you have perceived the alarm by short pressing the round button.
Want to print your doc? This is not the way.
Try clicking the ⋯ next to your doc name or using a keyboard shortcut (
