radiacode_cyberspace
radiacode_cyberspace
Device manual

Display modes

Monitor
Dose
Search
Spectrum
One of four display modes is available at any time of the assessment of radiation situation. The default mode after turning on is Monitor.
The display mode is selected via the menu. In the menu, the items are marked with icons and text names (see the table below):
1

Spectrum
Display mode: energy spectrum of absorbed photon radiation (X-ray and gamma)
2

Monitor
Display mode: dose rate or count rate (see also Display units)
3

Dose
Display mode: accumulated dose (X-ray and gamma).
4

Search
Display mode: graphical representation of the count rate (search graph).
There are no rows in this table
⁠

Selected item of the menu is marked with a negative icon.
You can view the device status in any of the display modes in the screen status bar. The status bar is located at the top of the display.
On the right side of the status bar, you can see standard information (that does not depend on the selected mode) (see the table below):
1

At least 60% of the charge.
2

At least 30% of the charge.
3

At least 10% of the charge.
4

Less than 10% charge, need to charge the battery.
5

The battery is charging.
6

Powered from an external source, charging is finished.
7

Swing buttons are locked.
8

USB connection established.
9

Bluetooth connection established.
10

All sounds are turned off.
11

Separately permitted sounds are turned on.
12

Alarm level 1.
13

Alarm level 2.
There are no rows in this table
⁠

The following icons represent standard device information:
Alarm sign: exceeding thresholds for dose rate or accumulated dose - presence and level.
Sound status: on, off.
External connection sign: presence and type - USB, Bluetooth.
Swing buttons control sign: locked, unlocked.
Built-in battery status: charge level (4 variants), charging, powered from the external source (end of charging).

Example of the standard status information is shown below:
1
​
There are no rows in this table
⁠
exceeding threshold 1 for the dose rate or accumulated dose;
sounds are enabled;
USB connection established;
swing buttons are locked;
battery is charging.

Note: In all Display modes, a long press on the swing button "up" global turns on and off the sound signaling.

Want to print your doc?
This is not the way.
Try clicking the ⋯ next to your doc name or using a keyboard shortcut (
CtrlP
) instead.