radiacode_cyberspace

Device manual

Device settings

The device settings are available from the corresponding submenu of the device - "Settings".

(while in one of the Display modes):

enter the main menu by long pressing the round button;

There are no rows in this table

⁠

set focus on [Settings] item by short pressing the "up" and "down" swing buttons;

confirm your choice by short pressing the round button.

There are no rows in this table

⁠

After entering the "Settings", you can move the focus to the desired item by short pressing the "up" and "down" swing buttons.

The structure of the "Settings" submenu with its brief description is shown below:

Display units

Selection of the assessment type of radiation intensity for Monitor mode: dose rate or count rate. This type affects the display units which also depend on Measurement units: Sv/h or R/h for dose rate selection, CPS (counts/s) or CPM (counts/min) for count rate selection.

Measurement units

Selection of measurement units: for dose (dose rate): Sv (Sv/h) or R (R/h); for count rate: CPS or CPM.

Dose rate

Setting thresholds 1 and 2 for dose rate alarms.

Dose

Setting thresholds 1 and 2 for dose alarms; accumulated dose resetting.

Screen

Selection of display backlight and rotation modes.

Signals

Global: turning on/off the sound and vibration signaling; gamma quanta registration: turning on/off the sound (clicks) and light signaling; alarms and buttons: separate turning on/off the sound and vibration signaling.

Bluetooth

Bluetooth turning on/off.

Language

Language selection: English, Russian.

Time

Setting current time.

Device info

View the information about the device: serial number, firmware version and bootloader version.

Factory settings

Calling up the menu for reset device settings.

There are no rows in this table

⁠

To return to the top level or quit the menu (while in the "Settings" ):

set focus on the [<Back] or [<< Menu quit] item according to your choice;

confirm your choice by short pressing the round button.

There are no rows in this table

⁠

Want to print your doc?
This is not the way.

Try clicking the ⋯ next to your doc name or using a keyboard shortcut (

CtrlP

) instead.